A simple custom glass bottle, but in its form, there are various types. Here are the various types of custom glass bottles for you.
Customized pattern glass bottle
The pre-treatment section of glass bottle spraying includes pre-stripping, main stripping, surface adjustment, etc. If it is in the north, the temperature of the main stripping part should not be too low, and it needs to be kept warm. Otherwise, the treatment effect will not be ideal.
Preheating section: After the pretreatment, it will enter the preheating section. It is recommended that the glass bottle should have a certain amount of residual heat on the sprayed workpiece when it reaches the powder spraying room, so as to increase the adhesion of the powder.
Glass bottle soot blowing purification section:
If the process requirements of the workpiece to be sprayed are relatively high, this section is essential. Otherwise, if there is a lot of dust adsorbed on the workpiece, the surface of the workpiece after processing will have a lot of particles, which will reduce the quality.
Drying section:
What should be paid attention to in this section is the temperature and baking time. The powder is generally 180-200 degrees, depending on the material of the workpiece. Also, the drying furnace should not be too far away from the powder spraying room, generally 6 meters.
Powder spraying section:
The key to this paragraph is the technical problem of the powder spraying master. If you want to create good quality, it is still very worthwhile to spend money on a skilled master.
